Energy Publications and Presentations

 

UD-Industrial Assessment Center

UD-IAC Slideshow

 

UD-IAC Energy Saving Opportunities

 

Whole-System Inside-Out Approach to Energy Assessments

Energy Audit Best Practices, Kissock, K., 3rd Annual E Source Major Accounts Training Conference and Summit, Boston, MA, May 9-11, 2007.

 

Inside-out Approach For Identifying Industrial Energy and Waste Reduction Opportunities, Kissock, Hallinan and Bader, Journal of Strategic Planning for Energy and Environment, 2001.

 

Lean Energy Analysis: Industrial Facilities

“Using M&V Models to Understand Energy Through Lean Energy Analysis”, Presentation at Panel on Verification of Industrial Facility Energy Improvement, American Council on an Energy Efficient Economy Summer Study on Industrial Energy Efficiency, Niagara Falls, NY,  July 27, 2011.

Abels, B., Sever, F., Kissock, K. and Ayele, D.,”Understanding Industrial Energy Use through Lean Energy Analysis, SAE 2011 World Congress, Detroit, MI, April 12-14, 2011

Lammers, N., Kissock, K., Abels, B. and Sever, F., “Measuring Progress with Normalized Energy Intensity“,2011, SAE 2011 World Congress, Detroit, MI, April 12-14, 2011

 

Kissock, J.K. and Eger, C., 2008, “Measuring Industrial Energy Savings”, Journal of Applied Energy, Vol. 85, Issue 5, pp. 347-361, May.

 

Understanding Industrial Energy Use through Sliding Regression Analysis, Eger, B. and Kissock, K., ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, 2007.

 

Targeted Energy Efficiency with Multi-facility Benchmarking, Kissock, K., E Source Energy Managers’ Roundtable, Boston, MA, May 9-11, 2007.

 

Measuring Industrial Energy Savings, Kissock, K. and Eger, B.,Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3-6, 2006.

 

Productivity and Energy: Challenges and Opportunities For U.S. Manufacturers, Kissock, Ohio Energy Management and Restructuring Conference, Columbus, OH, February 17-18, 2005.

 

Benchmarking Approaches: An Alternate Method to Determine Best Practice by Examining Plant-Wide Energy Signatures, Patil Y., Seryak, J., and Kissock, K., ACEEE Summer Study on Energy in Industry, West Point, NY, July 19-22, 2005.

 

Lean Energy Analysis: Guiding Energy Reduction Efforts to Theoretical Minimum Energy Use, Seryak, J. and Kissock, K., ACEEE Summer Study on Energy in Industry, West Point, NY, July 19-22, 2005.

 

Understanding Manufacturing Energy Use Through Statistical Analysis, Kissock and Seryak, Industrial Energy Technology Conference, Houston, TX, 2004.

 

Lean Energy Analysis: Identifying, Discovering And Tracking Energy Savings Potential, Kissock and Seryak, Advanced Energy and Fuel Cell Technologies Conference, Society of Manufacturing Engineers, Livonia, MI, 2004.

 

Lean Energy Analysis: Buildings

Kissock, K.and Mulqeen, S., 2008, “Targeting Energy Efficiency Programs Using Advanced Billing Analysis”, ACEEE Summer Study on Energy Efficiency in Buildings, August 17–22, 2008, Pacific Grove, California.

 

Raffio, G., Isambert, O., Mertz, G., Schreier, C. and Kissock, K.,  2007, “Targeting Residential Energy Assistance Programs”, ASME International Solar Energy Conference, Long Beach, CA, June 27-30.

 

Inverse Simulation

Sever, F., Kissock, K., Brown, D., and Mulqueen, S., “Estimating Industrial Building Energy Savings using Inverse Simulation”, ASHRAE2011-86073, Las Vegas, NM, Jan 29-Feb 2, 2011.

Natural Lighting

Net Energy Costs of Skylights, Syed, R., Kleinhenz, P. and Kissock, K., ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, 2007.

 

A Hybrid Method For Estimating Natural Lighting Potential In Buildings, Kissock, K., ASME International Solar Energy Conference, Portland, OR, 2004.

 

Compressed Air

Alkadi, N. and Kissock, K., “Improving Compressed Air Energy Efficiency in Automotive Plants”, SAE 2011 World Congress, Detroit, MI, April 12-14, 2011

Abels, B. and Kissock, K., “Optimizing Compressed Air Storage for Energy Efficiency”, SAE 2011 World Congress, Detroit, MI, April 12-14, 2011

 

Improving Performance of Compressed Air Systems Through Calibrated Simulation, Schmidt, C., Kissock, K., and Eger, C., ACEEE Summer Study on Energy in Industry, West Point, NY, July 19-22, 2005.

 

Estimating Energy Savings in Compressed Air Systems, Schmidt and Kissock, Industrial Energy Technology Conference, Houston, TX, 2004.

 

Power Characteristics of Industrial Air Compressors, Schmidt and Kissock, Industrial Energy Technology Conference, Houston, TX, 2003.

 

Process Heating

Industrial Solid-State Energy Harvesting: Mechanisms and Examples, Kocoloski, M., McCarty, R., Eger, C., Hallinan, K. and Kissock, K., ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, 2007.

 

Energy Efficiency Process Heating Webinar – 8/24/2006

 

Energy Efficient Process Heating: Insulation and Thermal Mass, Carpenter, K. and Kissock, K., Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3-6, 2006.

 

Energy Efficient Process Heating: Managing Air Flow, Carpenter, K. and Kissock, K., Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3-6, 2006.

 

 

Steam Systems

Common Excess Air Trends in Industrial Boilers with Single-Point Positioning Control and Strategies to Optimize Efficiency, Carpenter, K. and Kissock, K., ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, 2007.

 

Quantifying Energy Savings From Improved Boiler Operation, Carpenter, K. and Kissock, K., Industrial Energy Technology Conference, New Orleans, LA, May 11-12, 2005.

 

Fuel Cells in Industry

A Feasibility Study of Fuel Cell Cogeneration in Industry, Phelps, S. and Kissock, J.K., Industrial Energy Technology Conference, Houston, TX. 1997.

 

Energy and Carbon Economics

Pohlman, D., Smith, J., Kissock, K., 2012, “Net-Zero Carbon Manufacturing At Net-Zero Cost”, World Renewable Energy Forum, Denver, CO, May 13-17, 2012.

 

Economics of Energy Efficiency in a Carbon Constrained World, Trombley, D. and Kissock, K., ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, 2007.

 

Building Energy Efficiency

Hallinan, K. P., Brodrick, P.,  Northridge, J., Kissock, J. K., Brecha, R. J., 2011, “Establishing Building Recommissioning Priorities and Potential Energy Savings from Utility Energy Data” ,  ASHRAE Transactions,  ML-11-003.

 

Hallinan, K. P., Mitchell, A., Brecha, R. J., Kissock, J. K., 2011, “Targeting Residential Energy Reduction for City Utilities Using Historical Electrical Utility Data and Readily Available Building Data”,  ASHRAE Transactions,  ML-11-009.

 

Brecha, R. J., Mitchell, A., Hallinan, K. P., Kissock, J. K., 2011, “Prioritizing Investment in Residential Energy Efficiency and Renewable Energy - A Case Study for the US Midwest”. Energy Policy, 39(5), 2982–2992.

Jochum, M., Murugesan, G., Kissock, K, Hallinan, K., 2011 “Low Exergy Heating and Cooling In Residential Buildings” Proceedings of ASME Energy Sustainability Conference, ESFuelCell2011-54671, August 7-10, Washington, DC USA.

 

Gilbert, R. and Kissock, K., 2007, “The Effect Of Thermal Mass On Thermal Transmission Loads”, ASME International Solar Energy Conference, Long Beach, CA, June 27-30.

 

Mirza, K. and Kissock, K., 2007, “An Analytical Solution for Determining Dynamic Thermal Loads through Walls”, ASME International Solar Energy Conference, Long Beach, CA, June 27-30.

Solar and Wind Energy

Ahmad, F., Komp, R., Ahmad, I. and Kissock, K., 2010, “Photovoltaic Module Assembly As Appropriate Technology In Pakistan”, ASME International Conference on Energy Sustainability, Phoenix, AZ, May 17-22.

Wenning, T. and Kissock, K., 2009, “Methodology For Preliminary Assessment Of Regional Wind Energy Potential”, ASME International Solar Energy Conference, Long Beach, CA, June 27-30.